Showing posts with label Guard flaring. Show all posts
Showing posts with label Guard flaring. Show all posts
Tuesday, July 8, 2008
Flares... now the rear!
The fronts guards turned out so well I decided to give the rears a go. The rears require a little more effort, the inner guard has to be first seperated from the outer guard and cut away a little to provide some room. Then after the flaring is done you need to re-attach(weld) the inner to the outer to provide adequate strength to the guard and stop crap being flicked up into the rear quarter cavity. I drilled the spot welds out, in hindsight I probably should have ground them through to prevent the holes in the lip you see in the pics. It wasnt a big deal in the end because I folded the lip back over to pretty much cover the holes. I also ran a bead of sikaflex along the join where I welded the inner guard to the outer to make sure it was a water tight seal. Once again I was pretty happy with the result!
Labels:
flares,
Guard flaring,
sikaflex,
Superlight,
welding
Flares
Fitting decent sized wheels and tyres means modifying the stock guards. I had seen a few AE86's with hand flared guards which came out looking pretty good, so I decided to give it a go myself and hopefully I could enough clearance to fit the wheels and tyres I had. I started with the front guards as these were the easiest to do and if I stuffed it up all I had to do was source a new guard or buy aftermarket frp guards already flared. I purchased a cheap dodgy hammer and dolly set from Auobarn and set about pounding out the flare. I was suprised with how well they came out! I havent even used any filler on them yet.
Subscribe to:
Posts (Atom)