Showing posts with label flares. Show all posts
Showing posts with label flares. Show all posts

Tuesday, July 8, 2008

N2 Fatness!

Scored a set of TRD N2 flares(well good quality copies)! Always wanted to go N2 widebody but wasnt the plan to start with. I had to grab these though as they were too cheap to pass up! Unfortunately the budget wont stretch for a set of wheels & tyres to suit. I also need the front lip which I know of a couple of sources to get it from. But for the meantime I'll just have to settle for a quick mock up to see how they look before stashing them away for another day!


Flares... now the rear!

The fronts guards turned out so well I decided to give the rears a go. The rears require a little more effort, the inner guard has to be first seperated from the outer guard and cut away a little to provide some room. Then after the flaring is done you need to re-attach(weld) the inner to the outer to provide adequate strength to the guard and stop crap being flicked up into the rear quarter cavity. I drilled the spot welds out, in hindsight I probably should have ground them through to prevent the holes in the lip you see in the pics. It wasnt a big deal in the end because I folded the lip back over to pretty much cover the holes. I also ran a bead of sikaflex along the join where I welded the inner guard to the outer to make sure it was a water tight seal. Once again I was pretty happy with the result!

Flares

Fitting decent sized wheels and tyres means modifying the stock guards. I had seen a few AE86's with hand flared guards which came out looking pretty good, so I decided to give it a go myself and hopefully I could enough clearance to fit the wheels and tyres I had. I started with the front guards as these were the easiest to do and if I stuffed it up all I had to do was source a new guard or buy aftermarket frp guards already flared. I purchased a cheap dodgy hammer and dolly set from Auobarn and set about pounding out the flare. I was suprised with how well they came out! I havent even used any filler on them yet.